Pressure Reducing Station

PRESSURE REDUCING STATION

All PIPES MATERIAL ARE CARBON STEEL SEAMLESS INLET FLANGE AS PER STANDARD OUTLET FLANGE ARE AS PER STANDARD FLANGES ARE TO BE WELDING HYD. TEST TESSURE OF PRS AS PER STANDARD TECHNICAL SPECIFICATION FLOW RATE Kg/hr. (MAX) :- 1200 INLET PRESSURE Kg/cm2g :- 5.0 TO 300 OUTLET PRSSURE kg/cm2g :- 2.0 TO 150 INLET TEMPERATURE`C :- SATURATE 1. STEAM SEPARATOR 2. STRAINER 3. STOP VALVE (INLET) 4. REDUCER 5. REDUCING VALVE 6. DIVERGER 7. STOP VALVE (OUTLET) 8. STOP VALVE (BYPASS) 9. SAFETY VALVE 10. PRESSURE GAUGE 11. STOP VALVE 12. STEAM TRAP  13. INLET PIPE 14. OUTLET PIPE 15. BY PASS PIPE 16. BENG 17. FLANGES.s

Pressure Redicucing Station With Control Valve

ALL PIPES MATERIAL ARE TO BE OF CARBON STEEL SEAMLESS TO ASTM A 106 GR. B, SCH 40 INLET FLANGE ARE AS PER ANSI B16.5-300# OUTLET FLANGE ARE AS PER ANSI B16.5 150# FLANGES ARE TO BE WELDING AS PER FIG. 29 OF I.B.R. ALL DIMENSIONS ARE INMM AND TOLE. MAINTAINED WITHIN#100mm HYD. TEST PRESSURE OF PRS 75 kg/cm 2 FOR 300 # TECHNICAL SPECIFICATION FLOW RATE Kg/hr. (MAX) :- 1000 INLET PRESSURE Kg/cm2g :- 20 OUTLET PRSSURE kg/cm2g :- 10 INLET TEMPERATURE`C :- SATURATED 1. STEAM SEPARATOR2. STRAINER 3. STOP VALVE (INLET) 4. REDUCER 5. REDUCING VALVE6. DIVERGER7. STOP VALVE (OUTLET)8. STOP VALVE (BYPASS)9. SAFETY VALVE 10. PRESSURE GAUGE11. STOP VALVE12. STEAM TRAP 13. INLET PIPE 14. OUTLET PIPE 15. BY PASS PIPE 16. BENG 17. FLANGES.